JAC HFC4181KR1 Owner's Manual page 50

OWNER ' S MANUAL
JAC HEAVY DUTY TRUCK
How to adjust rolling angle
Adjust the rolling angle according to vehicle nd driving condition.
●
After removing the split pin, loosen the nut by turning it counterclockwise 3
●
or 4 times.
Fix the wedge to desired position
●
Insert the split pin and bend it after the nut has been tightened.
●
How to adjust inside diameter of jaw
If the inside diameter of jaw is worn, adjust it.
●
Turn the limit dog with a tool counterclockwise.
●
● Loosen the nut slowly. This will diminish the inside diameter of jaw accord鄄
ing to moving yoke forward.
● If it's inside diameter is 51-51.2 using the Gauge, tighten the limit dog to
adhere the nut perfectly. At this time, check that the gauge could be rotated
by hand.
92
Before towing, make sure that there is no interference between coupler
●
parts.
Confirm the adherence state of limit dog and nut, operating state of sec鄄
●
ondary lock.
Do not tighten the nut clockwise greater than primary state absolutely.
●
ADJUSTING BED
By rotating the lever 1, the height of the bed is controlled.
CAUTION:
Be sure not to hurt yourself.
93