JAC HFC4181KR1 Owner's Manual page 10

OWNER ' S MANUAL
JAC HEAVY DUTY TRUCK
Lumbar Support Adjustment (If installed) (Driver's seat only)
The seats in some JAC are equipped with adjustable lumbar support.
The lumbar support can be adjusted in three stages to provide the most com鄄
fortable support.
1. Weak; 2. Medium; 3.Strong
Seat Cushion Height Adjustment (If installed) (Driver's seat only)
To raise or lower the front part of the seat cushion, tum the front knob forward
or rearward. To raise or lower the rear part of the seat cushion, turn the rear
knob forward or rearward.
12
SEAT BELT PIVOT
HEIGHT ADJUSTMENT (If installed)
The location of the upper anchorage point can be set (for greater belt comfort
and security) to any one of four preset positions. To adjust the seat belt pivot
push the knob upward or downward to the required setting, ensuring that it
engages one of the preset positions (on releasing the knob).The height ad鄄
juster must always be locked into position while the vehicle is stationary. Do
not attempt to ad just the height of the upper anchorage point while the vehi鄄
cle is moving. If you are any doubt as to the method of adjustment or the opti鄄
mum height position for your front seat belt always contact your nearest JAC
Dealer.
WARNING:
The height adjuster must be in the locked position when the vehicle is moving.
13