JAC HFC4181KR1 Owner's Manual page 23

OWNER ' S MANUAL
JAC HEAVY DUTY TRUCK
HEADLIGHT SWITCH
To operate the headlights, turn the barrel on the end of the multifunction
switch. The first position turns on the parking lights, sidelights, taillights and
instrument panel lights. The second position turns on the headlights.
High-beam and Low-beam
To turn on the headlight high beams, push the lever upward. For low beams,
pull the lever down. The appropriate headlight beam indicator light will come
on at the same time.
NOTE:
This function is operated when the headlight switch is in the "ON" position.
38
PASSING SWITCH
The headlights will be flashed when the lever is pushed upward and release
automatically. The headlights can be flashed even though the headlight switch
is in the "OFF' position.
WINDSHIELD WIPER
The windshield wiper switch has three positions:
INT: Intermittent wiper operation
LO : Low-speed operation
HI : High-speed operation
NOTE:
To prevent damage to the wiper system, do not attempt to wipe away heavy
accumulations of snow or ice.
Accumulated snow and ice should be removed manually, If there is only a light
layer of snow or ice, operate the heater in the defrost mode to melt the snow or
ice before using the wiper.
39