JAC HFC4181KR1 Owner's Manual page 52

OWNER ' S MANUAL
JAC HEAVY DUTY TRUCK
TILTING CAB
To tilt the cab, drive the vehicle to a flat surface and proceed as follows:
1. Apply the parking brake and shift the gearshift lever into neutral. Apply
chocks to the wheels and shut off the engine.
2. If there are articles on the seat, they could break the windshield when the
cab is tilted.
3. Make sure that the doors are securely closed.
4. Check to ensure that there is enough space around the cab. More than 1 m
wide space is required before and above the cab.
5. Before the cab is brought down, check to ensure that there are no waste
cloth and other combustible things left behind in the engine room.
MANUAL TILTING CAB
To raise the cab
1. Remove the hook lever key ② from the lever ①.
2. Pull the lever toward you.
NOTE:
Make sure that the lever is pulled all the way until it touches the stopper. If the
lever is not pulled, the hook might not fit in place when the cab is returned.
96
3. Hold the grip ③ of the cab. While pressing it down, pull the safety hook ④.
4. The cab will go up. While pressing it down to prevent abrupt motion, let it
go up slowly.
5. Push the cab all the way up, and the cab will be automatically held in posi鄄
tion by the cab stay. Insert the safety pin⑤.
CAUTION:
For safety's sake, make sure the safety pin is inserted.
97