Advertisement
TECHNICAL DATA
CORDLESS EXPANDER
Production code..........................................................................
Stroke .........................................................................................
Pipe diameter .............................................................................
Battery voltage............................................................................
Weight according EPTA-Procedure 01/2014 (2.0 Ah ... 6.0 Ah) .
Recommended ambient operating temperature .........................
Recommended battery types......................................................
Recommended charger ..............................................................
Noise/vibration information
Measured values determined according to EN 62841.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A)) ...........................
Sound power level (Uncertainty K=3dB(A)) ................................
Wear ear protectors!
Total vibration values (vector sum in the three axes) determined
according to EN 62841.
Vibration emission value a
.....................................................
h
Uncertainty K= .........................................................................
WARNING
The vibration and noise emission level given in this information sheet has been measured in accordance with a standardized
test given in EN 62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of
exposure.
The declared vibration and noise emission level represents the main applications of the tool. However if the tool is used for
diff erent applications, with diff erent accessories or poorly maintained, the vibration and noise emission may diff er. This may
signifi cantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration and noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the job. This may signifi cantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator from the eff ects of vibration and/or noise such as: maintain the
tool and the accessories, keep the hands warm, organization of work patterns.
WARNING Read all safety warnings, instructions,
illustrations and specifi cations provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS
Do not change the properties or shape of the tool. It is
particulary important not to change the shape or size of the
cone by machining it or by altering its original properties,
hardness, strenght, etc. by heating the tool or keeping it in
the vicinity of high temperature heat sources
Use the tool correctly. Take particular care to tighten the
expander head onto the tool in order to achieve full
expansion. Make sure the segments of the expander head
are not bend or damaged otherwise.
Never use, carry or put away the tool without a expander
head on it.
Keep fi ngers and hands away from the expander head
moving area.
Do not dispose of used battery packs in the household
refuse or by burning them. Milwaukee Distributors off er to
retrieve old batteries to protect our environment.
Do not store the battery pack together with metal objects
(short circuit risk).
No metal parts must be allowed to enter the battery section
of the charger (short circuit risk).
Use only C12 chargers for charging C12 battery packs. Do
not use battery packs from other systems.
Never break open battery packs and chargers and store
only in dry rooms. Keep dry at all times.
Battery acid may leak from damaged batteries under
extreme load or extreme temperatures. In case of contact
with battery acid wash it off immediately with soap and
water. In case of eye contact rinse thoroughly for at least
10 minutes and immediately seek medical attention.
16
ENGLISH
M12 FPXP
.....................................4749 06 01...
...000001-999999
.......................................... 14 mm
...... ≤ ø 32 x 2,9, ≤ ø 25 x 3,5 mm
.......................................... 12 V
...........................2,2 kg ... 2,4 kg
...................................-18°C ... +50 °C
......................................... M12B...
...... M12-18 C; M12-18 FC; M12-18 AC; M12 C4; C12 C
.......................................... 75 dB (A)
.......................................... 86 dB (A)
....................................... 0,93 m/s
2
......................................... 1,5 m/s
2
Warning! To reduce the risk of fi re, personal injury, and
product damage due to a short circuit, never immerse your
tool, battery pack or charger in fl uid or allow a fl uid to fl ow
inside them. Corrosive or conductive fl uids, such as
seawater, certain industrial chemicals, and bleach or
bleach containing products, etc., can cause a short circuit.
SPECIFIED CONDITIONS OF USE
The cordless expander is intended to be used to expand
plastic pipes for installation of Q&E fi ttings.
Do not use this product in any other way as stated for
normal use.
EC-DECLARATION OF CONFORMITY
We declare as the manufacturer under our sole
responsibility that the product described under "Technical
Data" fulfi lls all the relevant regulations and directives listed
below and that the following harmonized standards have
been used.
EN 62841-1:2015
EN 55014-1:2017+A11:2020
EN 55014-2:2015
EN IEC 63000:2018
Winnenden, 2020-10-30
Alexander Krug
Managing Director
Authorized to compile the technical fi le.
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
GB DECLARATION OF CONFORMITY
We declare as the manufacturer under our sole responsibility
that the product described under "Technical Data" fulfi lls all
the relevant provisions of the following Regulations S.I.
2008/1597 (as amended), S.I. 2016/1091 (as amended), S.I.
2012/3032 (as amended) and that the following designated
standards have been used:
BS EN 62841-1:2015
BS EN 55014-1:2017+A11:2020
BS EN 55014-2:2015
BS EN IEC 63000:2018
Winnenden, 2020-10-30
Alexander Krug
Managing Director
Authorized to compile the technical fi le.
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
BATTERIES
Battery packs which have not been used for some time
should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the
performance of the battery pack. Avoid extended exposure
to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept
clean.
For an optimum life-time, the battery packs have to be fully
charged, after used.
To obtain the longest possible battery life remove the
battery pack from the charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below
27°C and away from moisture
Store the battery packs in a 30% - 50% charged condition
Every six months of storage, charge the pack as normal.
BATTERY PACK PROTECTION LI-ION BATTERY
The battery pack has overload protection that protects it
from being overloaded and helps to ensure long life.
Under extreme stress the battery electronics switch off the
machine automatically. To restart, switch the machine off
and then on again. If the machine does not start up again,
the battery pack may have discharged completely. In this
case it must be recharged in the battery charger.
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods
Legislation requirements.
Transportation of those batteries has to be done in
accordance with local, national and international provisions
and regulations.
• The user can transport the batteries by road without
further requirements.
• Commercial transport of Lithium-Ion batteries by third
parties is subject to Dangerous Goods regulations.
Transport preparation and transport are exclusively to be
carried out by appropriately trained persons and the
process has to be accompanied by corresponding
experts.
When transporting batteries:
• Ensure that battery contact terminals are protected and
insulated to prevent short circuit.
• Ensure that battery pack is secured against movement
within packaging.
• Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice
CHECK INSTALLATION OF EXPANDER HEAD
The expander head must fi t tightly against the tool.
Ensure the head segments do not "fl ower".
Rotate the six expander segments in the clockwise
direction. The head will rotate freely. The head should not
rotate counterclockwise.
The expander head collar will fi t fl ush against the tool.
Correct installation by loosening the head slightly and
rotating the segments until they engage in the cogs.
Re-tighten the
head.
ADVICE FOR OPERATION
Quick and Easy (Q&E) is a fi tting concept for Uponor-PEX
pipes and systems. The joint is made gradually expanding
the pipe with a Q&E Ring fi tted to its outside, and then
allowing it to shrink over the fi tting nipple. Only genuine
Q&E fi ttings, rings and expander tools may be used.
For detailed instructions on the correct use of this machine
with Uponor Q&E piping components, please refer to the
separate user guide included with this machine.
Milwaukee expander heads will rotate automatically at
each expansion. This is checked from time to time without
pipe.
COLD WEATHER INSTALLATION
The tool with battery must be warmed up before operating
in temperatures below 5°C by doing some cycles without
pipe.
The lowest ambient temperature for Q&E is -15°C.
TIGHTNESS TESTING
Tightness testing shall be carried out in accordance with
the relevant standard EN 806 part 4.
Further information you will get from Uponor in your country
TROUBLESHOOTING EXPANDER HEAD
If expander head does not expand when trigger is pulled:
• Verify that the expander head is fully retracted.
If the head does not fully retract at the end of an expansion:
• Press the manual release button to fully retract the
expander cone
• Remove the expander head from the tool and rein-stall,
verifying proper installation.
ENGLISH
17
Advertisement
