Table of Contents
Advertisement
PRECOMP
SECTOR
Video
This category selects the type of video adapter used for the primary system
monitor. Although secondary monitors are supported, you do not have to
select the type in Setup.
EGA/ VGA
Enhanced Graphics Adapter / Video Graphic Array. For EGA,
VGA, SEGA, SVGA, or PGA monitor adapters.
CGA 40
Color Graphic Adapter, powering up in 40 column mode.
CGA 80
Color Graphic Adapter, powering up in 80 column mode.
MONO
Monochrome adapter, including high resolution monochrome
adapters.
Error Halt
This category determines whether the computer will stop or not if an error
is detected during powering up.
No errors
All errors
All, But Keyboard
All, But Diskette
All, But Disk/Key
Memory
This category display-only what is determined by POST (Power On Self
Test) of the BIOS.
Base Memory
Extended Memory
Other Memory
Total Memory
SpeedEasy CPU Setup
write precom
number of sectors
The system boot will not stop for any error that may
be detected.
Whenever the BIOS detects a non-fatal error, the
system will stop and you will be prompted.
The system boot will not stop for a keyboard error,
but it will stop for all the other errors.
The system boot will not stop for a disk error; but it
will stop for all the other errors.
The system boot will not stop for a keyboard or disk
error, but it will stop for all the other errors.
The POST of the BIOS will determine the amount of
base (or conventional) memory installed in the system.
The BIOS determines how much extended memory
is presented during the POST.
This is the memory that can be used for different
applications. Shadow RAM is mostly used in this
area.
Total memory of the system is the sum of the above
memory.
Chapter 3
LANDZ
landing zone
MODE
HDD access mode
3 - 3
Advertisement
Table of Contents
