Page 1
Operating and Installation Instructions Gourmet Drawer It is essential to read the operating and installation instructions before setup, installation, and commissioning. This prevents both personal injury and damage to the appliance. en-US, CA M.-Nr. 11 924 070...
ESW 7010, ESW 7110 ..................... 25 ESW 7570, ESW 7580, ESW 7670, ESW 7680 ..........26 Low temperature cooking ................... 27 Other uses ........................32 Networking with Miele Built-in Appliances ............33 Sabbath mode ....................... 34 Cleaning and care ......................35 Frequently asked questions..................37 Optional accessories....................
Page 3
Contents Installation notes ......................42 Installation dimensions ESW 7010, ESW 7110 ............43 Combination with an H 2840 or CVA/DGC/H 7x4x .......... 43 Combination with a DGC/H 7x6x ................44 Side view........................45 Connections and ventilation ................... 46 Installation dimensions ESW 7570, ESW 7670 ............47 Combination with a CVA/DGC 7x7x or H 7x7x BM ..........
“IMPORTANT SAFETY INSTRUCTIONS”. Miele cannot be held liable for injury or damage caused by non- compliance with these instructions. Keep these operating and installation instructions in a safe place...
IMPORTANT SAFETY INSTRUCTIONS Appropriate use This drawer is intended for domestic use and use in other similar environments. The drawer is not intended for outdoor use. The warming drawer is intended for domestic use only as de- scribed in these instructions.
Unauthorized installation, maintenance, and repairs can cause considerable danger for the user. Installation, maintenance, and re- pairs must only be carried out by a Miele authorized technician. A damaged drawer can be dangerous. Always check for visible signs of damage. Never use a damaged appliance.
Page 7
IMPORTANT SAFETY INSTRUCTIONS Any repairs not performed by a Miele authorized service technician will void the warranty. Defective components should be replaced by Miele original parts only. Only with these parts can safety of the appliance be assured as intended by the manufacturer.
IMPORTANT SAFETY INSTRUCTIONS Correct use You could burn yourself on the hot drawer or hot dishware. Protect your hands with heat-resistant pot holders or gloves when handling hot items. Do not let them get wet or damp. Heat transfers through damp and wet material more quickly with the risk of scalding or burn- ing yourself.
Never use a steam cleaner for cleaning. Accessories Use only genuine original Miele parts. If parts or accessories from other manufacturers are used, the warranty may become void. Do not clean the non-slip liner in the dishwasher or washing ma- ...
Consult with local authorities, dealers or Miele in order to dispose of and recycle electrical and electronic appliances. Miele assumes no responsibility for deleting any personal data left on the appliance being disposed.
Overview ESW 7010, ESW 7110 a Non-slip liner b Controls and indicators c Drawer front with Push2open mechanism The drawer can be opened and closed by lightly pressing the drawer front.
Overview ESW 7570, ESW 7580, ESW 7670, ESW 7680 a Non-slip liner b Controls and indicators c Drawer front with Push2open mechanism The drawer can be opened and closed by lightly pressing the drawer front. d Wire Rack e Air vents...
Indicates that the Warm Dishes/ Plates operating mode is set. k indicator light Indicates that the Warm Cups/ Glasses operating mode is set. l indicator light Indicates that the drawer can be controlled via your mobile device. m Optical interface (for Miele Service only)
Overview Included accessories The accessories supplied with your ap- pliance, as well as a range of optional ones, are available to order from Miele (see “Optional accessories”). Wire Rack For increasing the loading area (ESW 7570, ESW 7580, ESW 7670, ESW 7680).
Before first use Remove any protective foil and stick- Heating up the drawer for the ers. first time Do not remove stickers carrying Heat the empty drawer for at least safety or installation information or 2 hours. the data plate. ...
- a WiFi network Therefore, the availability of featured - the Miele app functions cannot be guaranteed. - a Miele user account You can create a Miele@home availability user account via the Miele app. The ability to use the Miele app de-...
Page 17
Connecting via the app If requested to activate the WiFi on the drawer, proceed as follows: The Miele App can be used to connect to your network. Turn the drawer off. Install the Miele App on your mobile ...
Page 18
WPS on your router will no longer be able to access the quickly enough. Repeat the steps above. drawer. Tip: If your WiFi router does not support WPS, please connect via the Miele App.
Operation Open the drawer. Using the appliance Touch the sensor control to switch Malfunction can occur due to the drawer on. dirty and/or covered sensor buttons. Touch the Menu sensor control re- The sensor buttons do not react or peatedly until the required operating unintentional switching procedures mode lights up.
You catch fire. can operate your drawer remotely with Do not leave the drawer unattended the Miele App. for long periods in continuous opera- tion. Operation via the sensor buttons has precedence over operation via the app.
Operation Temperature settings Each operating mode has its own temperature range. The factory default recom- mended temperatures are printed in bold. The temperature can be altered in 10°F (5°C) increments by touching the Temperature sensor control. The last temperature selected is automatically activated the next time the drawer is switched on, and this is shown in the control field (exception: Low temperature cooking).
Keeping food warm Tips Health risk caused by using too low a temperature. To maintain your food’s optimum quality please note the following: Bacteria may develop in the food if the temperature used for keeping - Place the hot food in pre-heated dish- food warm is too low.
2 wire - temperature setting racks positioned on the left and right. An additional wire rack is available to order via the Miele online shop, Miele Cus- tomer Service, or from your Miele dealer (see “Optional accessories”).
6 hours. and so remains succulent and tender. Pre-heat the drawer with the suitable If food probes from other Miele Built- cooking containers for 15 minutes. This in Appliances are used in the drawer, ensures that the dishware and the inte-...
Page 28
Low temperature cooking Using the Low temperature Tips cooking operating mode - Do not cook the food all the way through. Sear the food again after Select the Low temperature cook- cooking. ing operating mode. - The food can be sliced straight away. ...
Low temperature cooking Pre-heat the cooking container for 15 minutes. In this time, rest the food at room temperature. Place the food into the pre-heated cooking container in the compartment. The cooking durations given in the charts are guidelines only. The food can be cooked further if required.
Networking is carried out via the Miele App as normal. See “Before first use – Miele@home” as well as the Miele App for detailed in- formation about this function. Operation via the sensor buttons has precedence over operation via the app.
Sabbath mode Deactivating Sabbath mode To comply with religious requirements, the drawer can be programmed for the You can deactivate the Sabbath mode duration of the Sabbath. This mode before the time has expired. will be switched off automatically after about 24 or 72 hours, depending on ...
Cleaning and care Unsuitable cleaning agents Risk of damage due to moisture ingress. To avoid damaging the surfaces of your appliance, do not use: The steam from a steam cleaner could reach live electrical compo- - cleaning agents containing soda, am- nents and cause a short circuit.
Page 36
Cleaning and care Cleaning the drawer front and Cleaning the non-slip liner interior Damage due to incorrect clean- ing. Malfunction can occur due to Washing the non-slip liner in a dish- dirty and/or covered sensor buttons. washer or washing machine will dam- The sensor buttons do not react or age it.
You can save time and money in many cases, as you do not need to contact Miele Customer Service. Information to help you rectify faults yourself can be found at www.miele.com/ser- vice. The following tables are designed to help you to find the cause of a malfunction or a fault and to resolve it.
Page 38
Frequently asked questions Problem Possible cause and solution The dishware is not hot The Warm Dishes/Plates operating mode was not enough. selected. Set the correct operating mode. The temperature setting is too low. Select a higher temperature. The air vents are covered. ...
Optional accessories Miele offers a range of useful acces- Wire Rack sories, as well as cleaning and condi- tioning products for your appliance. These products can be easily ordered from the Miele webshop. For increasing the loading area (ESW 7570, ESW 7580, ESW 7670, ESW 7680).
Contact in the event of a fault In the event of a fault which you cannot remedy yourself, please contact your Miele dealer or Miele Customer Service. You can book a Miele Service Call online at www.miele.com/service.
The drawer may only be built in combination with those appliances specified by Miele as being suitable. Miele cannot guarantee trouble- free operation if the appliance is operated in combination with appli- ances other than those quoted by Miele as being suitable.
*INSTALLATION* Installation Installation notes The drawer is available in 3 models, which differ in height. The building-in dimen- sions for the drawer must be added to the building-in dimensions for the combina- tion appliance to establish the niche size required. Combination options ESW 7010 ESW 7110 ESW 7570...
Installation Installation dimensions ESW 7010, ESW 7110 Combination with an H 2840 or CVA/DGC/H 7x4x Miele Drawers can be installed flush or proud. Discuss your requirements with your architect, kitchen designer, and installer. More installation drawings are available on the Miele website.
*INSTALLATION* Installation Combination with a DGC/H 7x6x Miele Drawers can be installed flush or proud. Discuss your requirements with your architect, kitchen designer, and installer. More installation drawings are available on the Miele website. The housing unit must not have a back panel installed behind the built-in niche.
*INSTALLATION* Installation Connections and ventilation A Cutout (min. 28 sq in/ 18,000 mm²) for power cord, water hoses, and ventila- tion ! No electrical connection in this area. The socket for the electrical connection must be accessible, e.g., in an adjacent kitchen cabinet. E Electrical connection...
Installation dimensions ESW 7570, ESW 7670 Combination with a CVA/DGC 7x7x or H 7x7x BM Miele Drawers can be installed flush or proud. Discuss your requirements with your architect, kitchen designer, and installer. More installation drawings are available on the Miele website.
*INSTALLATION* Installation Combination with a DGC 7x8x Miele Drawers can be installed flush or proud. Discuss your requirements with your architect, kitchen designer, and installer. More installation drawings are available on the Miele website. The housing unit must not have a back panel installed behind the built-in niche.
*INSTALLATION* Installation Connections and ventilation A Cutout (min. 28 sq in/ 18,000 mm²) for power cord, water hoses, and ventila- tion ! No electrical connection in this area. The socket for the electrical connection must be accessible, e.g., in an adjacent kitchen cabinet. E Electrical connection...
Installation dimensions ESW 7580, ESW 7680 Installation in a tall or base cabinet Miele Drawers can be installed flush or proud. Discuss your requirements with your architect, kitchen designer, and installer. More installation drawings are available on the Miele website.
*INSTALLATION* Installation Connections and ventilation A Cutout (min. 28 sq in/ 18,000 mm²) for power cord, water hoses, and ventila- tion ! No electrical connection in this area. The socket for the electrical connection must be accessible, e.g., in an adjacent kitchen cabinet. E Electrical connection...
*INSTALLATION* Installation Installation Check that the base on which the drawer will sit is clean and level (use a level). This is important for the ap- pliance to function correctly. Push the drawer into the housing unit until the drawer front is flush with the housing unit and make sure that it is correctly aligned in the unit.
Instal- (e.g., island networks, back-up systems) lation, repair, and maintenance work is possible. A prerequisite for operation should only be performed by a Miele- is that the power supply system com- authorized service technician. plies with national and local codes.
Declaration of conformity Radio Modules This device contains the following WiFi module: FCC ID 2ACUWEK037 IC ID 5669C-EK37 Frequency band 2.412 GHz – 2.462 GHz Maximum trans- < 0.1 W mitting power Compliance Statement This device complies with Part 15 of the FCC Rules and contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt...
Page 59
Customer Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters Headquarters and Miele Centre 9 Independence Way 161 Four Valley Drive Princeton, NJ 08540 www.mieleusa.com Vaughan, ON L4K 4V8 www.miele.ca Customer Support Phone: 888-99-MIELE (64353) Customer Care Centre info@mieleusa.com...
Need help?
Do you have a question about the ESW7580CTS and is the answer not in the manual?
Questions and answers