Before using for the first time
Connecting via the app
The Miele@mobile app can be used to
connect to your network.
Install the Miele@mobile app on your
mobile device.
To log in you will need:
1. your WiFi network password
2. your drawer password
Typ: ESW
XXXX
Fabr.- Nr. : 00 /
M.- Nr. : XX XXX XXX
The password for your drawer consists
of the last nine digits of the serial
number. This can be found on the
appliance's data plate.
Data plate
The data plate is located here:
Start signing the appliance on in the
app. Follow the signing-on
instructions.
18
Made in Germany
XX XXX
/
XXX XXXXXXXX
X /
XXX
If requested to activate the WiFi on the
drawer, proceed as follows:
Switch the drawer off.
Press and hold the sensor control.
At the same time, touch the
sensor control.
2 h will light up constantly, 3 h will flash
on and off.
The drawer will be ready for connection
in the next 10 minutes.
Follow the instructions in the app.
When successfully connected, 2 h and
3 h will light up constantly.
Quit the connection mode on the
drawer by touching the sensor
control.
The drawer can now be operated via
the app.