Specific Safety Precautions - pro.point 8843948 Instructions Manual

2-3/4 x 17-1/2 in. straight line air sander
Table of Contents

Advertisement

Available languages

Available languages

V1.0

SPECIFIC SAFETY PRECAUTIONS

WARNING! DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to the tool safety rules.
If you use this tool unsafely or incorrectly, you can suffer serious
personal injury.
1.
Use the correct tool for the job. This tool was designed for a
specific function. Do not modify or alter this tool or use it for an
unintended purpose.
2.
Do not use the tool if any parts are damage broken or misplaced.
Repair or replace the parts.
3.
Do not use any power tool with a malfunctioning power switch or
control. A power tool that fails to respond to the controls is
dangerous and can cause an injury. A qualified technician must
repair and verify the power tool is operating correctly before it can
be used.
4.
Never use a tool with a cracked or worn tool accessory. Change
the tool accessory before using it.
5.
Do not cover the air vents.
6.
Disconnect the power source before installing or servicing the tool.
7.
Never force the tool. Excessive pressure could break the tool,
resulting in damage to your workpiece or serious personal injury.
Excessive pressure is the cause if your tool runs smoothly under
no load, but roughly under load.
8.
Keep hands and fingers away from the work area. Any part of the
body contacting the tool's working parts could result in an injury.
AIR TOOL PRECAUTIONS
1.
Use only clean and dry compressed air as a power source.
Contaminated or moist air will gradually damage the tool.
2.
Install an in-line shutoff valve or regulator to allow immediate
control over the air supply in an emergency, even if a hose is
ruptured.
3.
Discontinue tool use if it does not work properly or air is leaking.
Tag or mark the tool as 'defective' or 'out of service' until repaired.
4.
Check the manufacturer's maximum pressure rating for air tools
and accessories. Compressor outlet pressure must be regulated to
Visit www.princessauto.com for more information
2-3/4 x 17-1/2 in. Straight Line Air Sander
8843948
5

Advertisement

Table of Contents
loading

Table of Contents