Table of Contents
Advertisement
Available languages
Available languages
8843948
5.
Non-skid footwear is recommended to maintain footing and
balance in the work environment.
6.
This tool can cause hearing damage. Wear hearing protection gear
with an appropriate Noise Reduction Rating to withstand the
decibel levels.
7.
The tool may contain high pressure. Use safety glasses and gloves
for protection during operation. Keep hands clear of the exposed
rubber portions of the hose.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to the tool.
1.
Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
2.
Avoid wearing clothes or jewelry that can become entangled with
the moving parts of a tool. Keep long hair covered or bound.
3.
Do not overreach when operating a tool. Proper footing and
balance enables better control in unexpected situations.
4.
Keep your fingers away from the trigger/switch while carrying the
tool, attaching an air hose or an accessory. Lock the trigger/switch
safety if available.
5.
Avoid unintentional starts. Be sure that the regulator/throttle switch
is in the neutral or OFF position when not in use and before
connecting it to any air source.
6.
Never point the air stream or tool at any point of your body, other
people or animals. Debris and dust ejected at high speed can
cause an injury.
7.
Serious injury or death may occur from inhaling compressed air.
The air stream may contain carbon monoxide, toxic vapors or
solid particles. Never inhale compressed air directly from the
pump or air tool.
8.
Securely hold this tool using both hands. Using a tool with only one
hand can result in loss of control.
4
2-3/4 x 17-1/2 in. Straight Line Air Sander
For technical questions call 1-800-665-8685
V1.0
Advertisement
Table of Contents
