Specific Safety Precautions; General Safety Precautions - pro.point 8349821 User Manual

8349821

SPECIFIC SAFETY PRECAUTIONS

DANGER! Ensure the RPM rating of the pad corresponds with the
manufacturer's recommended speed of the tool. Over speeding
an accessory will cause injury.
DANGER! Disconnect this tool before performing any
maintenance, changing accessories or when not in use to prevent
accidental start up.
WARNING! Use the proper hose and fitting. To prevent
coupling from shaking loose during vibrations, add a hose
whip and connect coupling between the air supply and hose
whip to ensure reliability and prevent injury (see Installing Air
Compressor instructions)
WARNING! To prevent injury and mishap, keep tool away from
body during operation.
WARNING! To prevent slippage and mishap, never use cloth
backed sanding discs. Use paper sanding discs and the
recommended adhesive. Follow the Adhesive manufacture's
directions exactly as specified.
NOTICE! Tools of this class operate on a wide range of air
pressures. It is recommended that the air pressure of this tool,
measure 90 PSI at the tool without load. Higher pressure will
shorten the tool's life due to wear and tear.

GENERAL SAFETY PRECAUTIONS

AIR TOOL PRECAUTIONS
1. Extended exposure to air tool noise may cause hearing loss.
Ear protection gear can reduce or eliminate the noise level.
Add a muffling device to the air tool's exhaust if possible.
2. Inspect the tool's airline for cracks, fraying or other faults
before each use. Discontinue use if the airline is damaged
or hissing is heard from the airline or connectors, while
operating the tool. Replace the defective component/airline.
Visit www.princessauto.com for more information
HEAVY DUTY STRAIGHT LINE AIR SANDER V 3.04
5