4.6
☞
☞
Insert and remove an
SD card step-by-step
40
Option
Key
Turn off
ON/OFF
Reset
ON/OFF
Hard
ON/OFF
shutdown
Working with the Memory Device
Keep the card dry.
•
Use it only within the specified temperature range.
•
Do not bend the card.
•
Protect the card from direct impacts.
•
Failure to follow these instructions could result in data loss and/or permanent
damage to the card.
16085_001
The SD card is inserted into a slot inside the Communication side
☞
cover of the instrument.
1.
Turn the knob on the Communication side cover to the vertical posi-
tion to unlock the communication compartment.
Description
Press and hold for 2 s.
The "Logout/Shutdown" screen is displayed.
Select Shutdown controller and sensor.
☞
For instruments set up in perman-
ent installations with external
power sources, for example monit-
oring, ensure external power
remains available until the instru-
ment has successfully completed
the power down process.
Press and hold for 2 s.
The "Logout/Shutdown" screen is displayed.
Choose one of the available reset options.
Press and hold for more than 8 s:
After 2 s, the "Logout/Shutdown" screen
•
is displayed.
Continue to press and hold until instru-
•
ment shuts down.
Operation