Table of Contents
Advertisement
3
3.1
Power button
NOTICE
3.2
Device status
BLK360, User Interface
All manuals and user guides at all-guides.com
User Interface
Power Button
013456_001
Power button
when the BLK360
is
Press and hold the
off.
button <0.5 sec.
Press and hold the
on and ready. The
button <0.5 sec.
LED is continuous
green.
Press and hold the
in Power Safe
button <0.5 sec.
mode. The LED is
off.
Press and hold the
on and ready. The
button >2 sec.
LED is continuous
green.
Press and hold the
on.
button > 5 sec.
It is mandatory to follow always this procedure to shut down the instrument.
Do not remove the battery from a running instrument!
Device Status
The ring-shaped LED lights up green, yellow or red in different intervals to show the
operation states of the BLK360.
a a a
a) Ring-shaped LED continuous
b) Ring-shaped LED blinking
c) Ring-shaped LED alternating
a
a) Power button
THEN
The BLK360 switches on and the LED starts
blinking yellow.
After counting down for 10 seconds the
BLK360 starts recording and the LED starts
blinking yellow.
The BLK360 is ready again. The LED turns to
continuous green.
The LED starts blinking yellow and the
BLK360 switches off.
The BLK360 switches off immediately. Hard
shutdown.
b b b
c c
15
Advertisement
Table of Contents
