Leica Geosystems iCON iCR80 User Manual page 37

Operation
7. After placing the tablet onto the mounting
plate, set the locking lever to the locked
position (see illustration).
16077_001
1. Face the instrument so that the vertical drive screw is on the left.
The battery compartment is below the vertical drive. Turn the knob
to the vertical position, opening the lid of the battery compartment.
2. Pull out the battery housing.
3. Pull the battery out of the battery housing.
4.
☞
At the top of the battery is a notch which corresponds to
the inner surface of the battery housing. This notch helps
you to place the battery correctly.
Place the battery into the battery housing, ensuring that the con-
tacts are facing outward. Click the battery into position.
5. Place the battery housing into the battery compartment. Push the
battery housing in until it fits completely into the battery compart-
ment.
6. Turn the knob to lock the battery compartment. Ensure that the
knob is returned to its original horizontal position.
16449_001
37