Layout Guidelines; Launchcc3235Mod Board Layout - Texas Instruments SimpleLink LaunchPad CC3235MODSF User Manual

www.ti.com
The integrator of the CC3235MODx and CC3235MODAx modules must comply with the PCB layout
recommendations described in the following subsections to preserve and minimize the risk with regulatory
certifications for FCC, ISED/IC, ETSI/CE, MIC, and SRRC
guidelines described in this section to achieve similar performance.

3.1 LAUNCHCC3235MOD Board Layout

The reference layout consists of a four-layer design.
3
Contact TI for more information on using SRRC ID Certification:
SWRU548C – FEBRUARY 2019 – REVISED SEPTEMBER 2021
Submit Document Feedback
3
. Also, TI recommends that customers follow the
Figure 3-1 shows the LAUNCHCC3235MOD top layer.
www.ti.com/tool/SIMPLELINK-CC3XXX-CERTIFICATION
CC3235MODSF SimpleLink™ Wi-Fi
Copyright © 2021 Texas Instruments Incorporated

Layout Guidelines

Chapter 3
Layout Guidelines
®
and IoT Solution With MCU
LaunchPad™ Hardware
31