1. Manuals
  2. Brands
  3. Atronic Manuals
  4. Arcade Game Machines
  5. e-motion
  6. Operating manual

Atronic e-motion Operating Manual

For b-level software b1.2.3
Hide thumbs Also See for e-motion:
Table of Contents

Advertisement

Quick Links

Atronic e-motion™
Operating Manual
for B-Level Software B1.2.3
Rev. 2.7
www.atronic.com
April 2007

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the e-motion and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Atronic e-motion

Summary of Contents for Atronic e-motion

  • Page 1 Atronic e-motion™ Operating Manual for B-Level Software B1.2.3 Rev. 2.7 www.atronic.com April 2007...
  • Page 2 DISCLAIMER Atronic makes no representation or warranties, express or implied, with respect to this publication, or any product of Atronic, including but not limited to warranties of merchantability or fitness for any particular purpose. Atronic reserves the right to make changes, enhancements, revisions and alterations of any kind to this publication or the product(s) it covers without obligation to notify any person, institution or organization of such changes, enhancements, revisions and alterations.

  • Page 3: Table Of Contents

    ONTENT Introduction ................Additional Manuals ............... How to identify the Software Level ..........Machine Components ..............Gameplay Money In ..................Game Screen ................ButtonPanel / Select Bet ............. Special Buttons ................Button Panel Layouts ..............Game Play, Double Up Feature (Gamble) ........Info Screen, Upper Display ............
  • Page 4 NOTE! Information in this document is subject to change without notice and does not represent a commitment on the part of Atronic. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose other than the purchaser’s personal use without written consent of Atronic.

  • Page 5: Introduction

    ->See "Parts Catalogue" for e-motion™ cabinets. All mentioned manuals can be found on a CD-ROM titled "Atronic Service Manual 2007" If this manual did not came with this CD-ROM, please ask Atronic Technical Service for a free copy. April 2007...
  • Page 6 1. Open the maindoor and open the logic box. Base EPROM version. 2. Remove the mainboard and check the label of the Software Manuals: EPROM mounted on socket U5. Atronic software manuals refer to a certain software level. 66001234 MB U05 8M MX27C8000PC-10 For example: HBS-STD-11.1.2.81...
  • Page 7 - blank page - April 2007...

  • Page 8: Machine Components

    Playfield Height Adjustment Mechanical Meters Button Panel Main Door Lock Jackpot Key Switch Audit Key Switch Hopper Drawer Hopper Drawer Lock Coin Bowl Bill Entry / Bill Acceptor Bill Decal Name Plate Atronic Installation Station (AIS) (Baseplate for mounting) April 2007...
  • Page 9 ACHINE OMPONENTS MACHINE COMPONENTS II Logicbox Top Glass Touch Filterboard Filterboard Logic Door Release Lever Controller Power Signal Logic Door Lock Reset Button Service Button Multimedia Board Cover Maindoor Switch Coin Unit Assembly Coin Acceptor Coin Optics Bill Acceptor Front Bezel Decal Lighting Bill Acceptor Door Motor...
  • Page 10 - blank page - April 2007...

  • Page 11: Gameplay

    AMEPLAY GAMEPLAY This chapter describes features and operating devices for gameplay. It includes following sections: • Money In Describes different ways of inserting money or booking money to the machine. • Game Screen Describes the layout of the game screen. •...

  • Page 12: Money In

    (optional), and supports legacy bonusing and remote key credit function. Coin In Atronic e-motion™ machines usually accept one specific type of coin or token, determined by customer specification. Coin in mechanics, coin acceptor and hopper are customized to this specific coin size and weight to provide highest performance, reliability and security.

  • Page 13: Game Screen

    AMEPLAY GAME SCREEN The game screen displays the game reels, credit meter, paid meter and other information that is rele- vant for the players. Additionally it displays handpay and jackpot messages as well as error messages in case of an unexpected machine state. Paid Meter Win Meter Credit Meter...

  • Page 14: Buttonpanel / Select Bet

    AMEPLAY BUTTON PANEL / SELECT BET Depending on remaining credits, possible bets are indicated by lit and flashing buttons. 1.Select the number of lines to play. Selectable PLAY X LINES buttons are lit. PLAY PLAY PLAY PLAY PLAY REPEAT MAX BET REPEAT LINE LINES...

  • Page 15: Special Buttons

    AMEPLAY SPECIAL BUTTONS Max Bet This button immediately starts a game with the PLAY PLAY PLAY PLAY PLAY highest bet setting. If there are enough credits on REPEAT MAX BET LINE LINES LINES LINES LINES REPEAT CREDITS PAYS BET 1 BET 2 BET 3 BET 5...

  • Page 16: Button Panel Layouts

    AMEPLAY BUTTON PANEL LAYOUTS Standard Button Panel Layout This standard layout is used for games that do not feature win two ways or Super Play™ functionality. PLAY PLAY PLAY PLAY PLAY REPEAT MAX BET LINE LINES LINES LINES LINES REPEAT CREDITS PAYS BET 1...
  • Page 17 AMEPLAY GAME PLAY When a valid bet has been selected the reels spin for some seconds before they stop. No winning combination on any active pay line: • Game routine is over. • If credits remain on the credit meter, another bet can be placed.
  • Page 18 AMEPLAY INFO SCREEN Player relevant information can be displayed by activating the SEE PAYS button (on button panel or on-screen). The displayed info screen provides information about: • General game rules • Paytable (in credits) • Payout handling • Winning combinations •...
  • Page 19 AMEPLAY CASH OUT Press the CASH OUT button located on the functional button panel to collect credits. Functional Button Panel Hopper Payout Cashable credits are paid directly from the hopper. If Cashout the number of coins to be cashed out is exceeding Button the hopper payout limit, a handpay is initiated.
  • Page 20 - blank page - April 2007...

  • Page 21: Machine Handling

    ACHINE ANDLING HANDPAY A handpay by an attendant is necessary, if the machine can not or must not fulfill the cash out. Cashout Handpay (Cancelled Credits) Note: The handpay was initiated by a cash out request that Cashout handpays are metered can not be paid out by the hopper or another payout on softmeter HAND PAID WITH device.
  • Page 22 ACHINE ANDLING HANDPAY (continued) Jackpot Handpay during Cash Fever™ Bonus Games If the highest progressive jackpot level was hit dur- ing a bonus game session, the machine will lock up and displays a jackpot message on-screen: <amount> JACKPOT WILL BE PAID AT THE END OF THE BONUS GAME At the same time a handpay message of the progres- sive jackpot amount is send to the accounting system.
  • Page 23 ACHINE ANDLING HANDPAY (continued) Jackpot Handpay during Free Games If the highest progressive jackpot level was hit dur- ing a free game session, the machine will lock up and displays a jackpot message on-screen: <amount> JACKPOT WILL BE PAID AFTER THE FREE GAMES PLEASE CALL ATTENDANT - YOU HAVE WON <amount>...
  • Page 24 ACHINE ANDLING HANDPAY (continued) Machine Behaviour Machine behaviour if a handpay has been initiated: • Handpay amount is displayed on screen. • Toplight is flashing (as adjusted). • Handpay message is sent to the online system. (if applicable). • Machine prevents all means of inserting credits. •...

  • Page 25: Celebration Limit

    ACHINE ANDLING CELEBRATION LIMIT If enabled, the celebration limit determines a threshold for jackpot handpays. A win that exceeds the adjusted limit initiates a jackpot celebration and needs to be acknowledged by an attendant using the jackpot key. Open the Service Menu and select "Settings / Lock Options / Limits"...

  • Page 26: Remote Key In

    ACHINE ANDLING REMOTE KEY IN / KEY CREDITS The remote key in function enables an attendant to Note: add credits to, or clear credits from the credit meter Remote Key In mode is not by means of the jackpot key. available in certain jurisdic- tions! •...
  • Page 27 ACHINE ANDLING OPENING THE MAIN DOOR 1. Unlock the maindoor lock by turning the key 90° clockwise. 2. With your right hand at the maindoor handle and with your left hand at the playfield, pull the main- door towards you and open it. 3.

  • Page 28: Hopper Empty / Hopper Refill

    ACHINE ANDLING HOPPER EMPTY / HOPPER REFILL If the hopper runs empty during a cashout. The hopper drawer lock must be locked manually. There is no slam lock. Any attempt to slam the drawer closed may damage the locking mechanism. Hopper empty procedure set to handpay mode Hopper Drawer Lock Figure a...

  • Page 29: Hopper Removal And Replacement

    ACHINE ANDLING HOPPER REMOVAL AND REPLACEMENT To remove the hopper for replacement or maintenance, follow these steps. 1. Unlock and open the maindoor. 2. Turn the machine power off. 3. Close the maindoor. 4. Make sure the coin bowl is empty and open the hopper drawer.

  • Page 30: Cashbox Exchange

    ACHINE ANDLING CASHBOX EXCHANGE / REMOVAL Follow these procedure to exchange or remove the bill cashbox (stacker). 1. Unlock the hopper drawer lock (fig. a) and leave it unlocked (do not remove the key). 2. Slide the coin bowl to the left. Hopper Drawer Lock Figure a 3.

  • Page 31: Voucher Paper Refill

    ACHINE ANDLING VOUCHER PAPER REFILL To refill the voucher printer with paper, follow these steps (procedure for Future Logic PSA-66 printer). 1. Open the maindoor. 2. Pull open the printer drawer until the paper tray is completely accessible. 3. Remove any remaining paper and debris from the paper tray.
  • Page 32 The playfield can be adjusted to automatically move back to the top, middle or bottom position when in idle mode for x minutes. This function is intended to automatically align the playfields of a bank of e-motion™ machines. April 2007...

  • Page 33: Touch Screen Calibration

    ACHINE ANDLING READ MECHANICAL METERS (Hardmeters) 1. To illuminate hardmeters, turn the audit key clock- wise. This will also activate the Audit Menu. 2. Read the mechanical meters. 3. When finished, release and remove the audit key. Note: See manual "Software / Basic Setup" for a detailed Audit Key Switch metering description.
  • Page 34 ACHINE ANDLING SERVICE GAME This function allows simulated game play for test or promotional purposes. The service game is only available while the front door is open and no credits are on the credit meter. When the service game starts 10,000 virtual credits are booked to the credit meter.
  • Page 35 - blank page - April 2007...

  • Page 36: Troubleshooting

    ROUBLESHOOTING CLEARING STATUS- AND ERROR MESSAGES Occasionally, machines encounter a problem that forces the machine into a machine lock (tilt) that has to be cleared. Also some on-screen messages require to be confirmed by an attendant. For example: If the logic box was opened, the message "LOGIC BOX OPEN - TURN THE AUDIT KEY"...

  • Page 37: Clearing Hopper Jam

    ROUBLESHOOTING CLEARING HOPPER JAM Adjust the hopper jam procedure in "Service Menu / Settings / Hardware / Hopper / Jam Procedure" to: • If a hopper jam occurs, left amount is handpay. • If a hopper jam occurs, the hopper jam has to be cleared.

  • Page 38: Clearing Bill Jam

    ROUBLESHOOTING CLEARING BILL JAM Follow these procedures to clear a bill jam in a JCM™ UBA-type bill acceptor. Remove the Transport Unit If the acceptor is mounted to the machine cabinet, it is necessary to pull out the transport unit in order to clear a bill jam or for preventive maintenance.

  • Page 39: Clearing Coin In Jam

    ROUBLESHOOTING CLEARING COIN IN JAM To clear a coin jam in the coin-in assembly, follow these steps. 1. Open the maindoor and make sure that the coin acceptor is not active (front LED is not lit). 2. Gently bend the spring clip to the left until it re- leases the coin acceptor.
  • Page 40 - blank page - April 2007...

  • Page 41: Service Menu

    ERVICE SERVICE MENU Several pages of information, configuration and diagnostics can be accessed from the Service Menu. The structure of the Service Menu is designed to be user friendly and self-explanatory. • To access the Service Menu, press the service button at the front of the logic box.
  • Page 42 ERVICE SERVICE MENU FLOWCHART Note: Date / Time Machine Information See manual "Software / Basic Setup" Top Light for a detailed description of the Basic Playfield Height particular Service Menu items. General Configuration Procedures Coin Acceptor Activate Coinacceptor Operation Mode Bill Acceptor Bills Enabled Voucher Redemption...

  • Page 43: Diagnostics Folder

    ERVICE DIAGNOSTICS FOLDER The diagnostics folder within the Service Menu provides several in-machine hardware tests. These tests are intended for regular maintenance and trouble-shooting. Availability of some tests depends on machine configuration (eg. A-Link status, barcode voucher). DIAGNOSTICS FOLDER FLOWCHART Coin Diverter Test Hopper Coin Handling...
  • Page 44 - blank page - April 2007...

  • Page 45: Audit Menu

    UDIT AUDIT MENU The menus MACHINE INFORMATION, SERVICE GAME, HISTORY, HELP and TOUCH CALIBRATION, are available within the Audit Menu. The structure of the Audit Menu is designed to be user friendly and self-explanatory. • To access the Audit Menu, turn the audit key whi- le the machine is in idle mode.

  • Page 46: History Folder (Softmeters)

    UDIT HISTORY FOLDER (Softmeters) Note: The history folder within the Audit Menu provides See manual "Software / Basic softmeters, game machine statistics Setup" for a detailed HISTORY (bookkeepings). The similar history folder can also be folder description. accessed from within the Service Menu. HISTORY folder can also be A brief definition of what each meter records can be accessed from within the...
  • Page 47 UDIT HISTORY FOLDER (Soft Meters) Note: Accounting See manual "Software / Basic Provides menus ACCOUNTING INFORMATION Setup" for a detailed HISTORY (softmeters) and EACH BILL COUNT. folder description. Game Provides last games recall, game statistics and a bet-line table. To review the last 10 games that have been played: 1.
  • Page 48 - blank page - April 2007...

  • Page 49: Machine Conversion Guide Lines

    ACHINE ONVERSION MACHINE CONVERSION GUIDE LINES Machine conversions can be classified into three different types. Note: The Atronic Technical Service Game Conversion team will be pleased to assist Paytable Conversion you in all matters regarding Denomination Conversion machine conversions and floor planning.

  • Page 50: Paytable Conversion

    ACHINE ONVERSION PAYTABLE CONVERSION If the machine is converted to a new paytable type, these areas of the machine are involved. Paytable Software Legend Kit Paytable Software The paytable software EPROM, located on the mainboard, is available in two types: Non-Configurable (Standard Paytable) Configurable...

  • Page 51: Denomination Conversion

    ACHINE ONVERSION DENOMINATION CONVERSION If the machine is converted to a new denomination, these areas of the machine are involved. Machine Configuration Denomination Decal Toplight Coin In Coin Out Machine Configuration Note: The machine's denomination is set during Initial Setup. See manual "Software / Basic Initial Setup is only applicable after a RAM reset.
  • Page 52 - blank page - April 2007...
  • Page 53 ECHNICAL ROCEDURES EXCHANGING THE TOP GLASS To exchange the top glass, follow these steps: Top Glass Release 1. Open the maindoor and locate the top glass re- Lever lease lever on the inner side of the maindoor. 2. Press and slide the release lever downwards, while holding the top glass with the other hand to pre- vent it from falling out of it's mounting.

  • Page 54: Technical Procedures

    ECHNICAL ROCEDURES REMOVE PLAYFIELD To remove the playfield assembly, follow these steps: 1. Open the maindoor. 2. Unplug all playfield cables that are connected to Cable Knurled nut the machine (two harnesses) and cut all cable ties holding that fixes these cables. device It is recommended to write down connectors and cable routing before unplugging the cables.

  • Page 55: Appendix

    PPENDIX APPENDIX Disclaimer Atronic does not provide/publish circuit diagrams of boards used for the Hi(!)bility™ platform. Boards produced by Atronic are based on multilayer SMD technology, any soldering work may cause permanent damage to one or several conductive strip(s) of the board.

  • Page 56: Wiring Diagram

    IRING IAGRAM April 2007...

  • Page 57: Peripherals Voltage Requirements And Connectors Pin-Out

    OLTAGE OUTS PERIPHERALS VOLTAGE REQUIREMENTS & CONNECTORS PIN-OUT Figures show board female connector pin layouts. Coin Acceptor Required Voltage: Connected to: Coinboard Connector: P3 (NRI-G13) P4 (MC-16) Bill Acceptor Required Voltage: Connected to: Filterboard Signal Connector: Hopper Required Voltage: Power Consumption: payout mode 0,5A-1,3A blocking...
  • Page 58 OLTAGE OUTS PERIPHERALS VOLTAGE REQUIREMENTS & CONNECTORS PIN-OUT Playfield Up / Down Button Required Voltage: Connected to: Buttonboard Connector: Bill & Coin Decal Required Voltage: Connected to: Buttonboard Connector: Button Panel Required Voltage: Connected to: Buttonboard Connector: Doormotor Required Voltage: Power Consumption: max.
  • Page 59 OLTAGE OUTS PERIPHERALS VOLTAGE REQUIREMENTS & CONNECTORS PIN-OUT Touch Controller Required Voltage: Connected to: MMPC Board Connector: Disk Drive Required Voltage: Connected to: MMPC Board Connector: Counterboard Required Voltage: Connected to: Filterboard Signal Connector: +24V +12V +12V Solenoid Required Voltage: Connected to: Coinboard Connector:...

Table of Contents