Table of Contents
Advertisement
8
Note: The NETWORK LED can only be in the ON state when the MODULE LED is ON
Network LED
This indicates the state of the connected network.
Network LED Indication
Network LED Indication
Network LED Indication
Network LED Indication
OFF
FLASH
LONG FLASH
ON
continuously, indicating that the Option is ready for external communications.
Description
Description
Description
Description
NOT READY/DISABLED: Initialising.
IDLE: No data is being received from Network Control
Module.
SOFT TIMEOUT: Drive not addressed in the last 10 seconds.
OK: Device has been addressed.
Siemens Apogee P1 Communications Interface
Advertisement
Table of Contents
