Drip Time - Bunn ICB-TWIN Installation And Operating Manual

PROGRAMMING THE BREWER (cont.)
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
COFFEE RECIPES:

DRIP TIME

This function allows the operator to adjust the DRIP
TIME (time from end of sprayhead flow to when liquid
stops dripping from the funnel). When the brew cycle
is complete, the display will show DRIPPING and will
countdown the time until the funnel empties.
Setting DRIP TIME:
Range: OFF to 5 minutes for all batch sizes.
NOTE: If the brewer is already in the DRIP TIME screen,
skip steps 1 through 9 and proceed directly to step
10.
1. Press and hold the right hidden button until the dis-
play reads SET LANGUAGE. Press the right hidden
button until the display reads REVIEW RECIPES.
2. Press YES to proceed. The display should now read
NO NAME COFFEE, along with MODIFY SHOW
NEXT.
3. Press and release NEXT to advance to the desired
recipe to be modified.
4. Press and release MODIFY. The display should read
BREW OZ:
5. Press and release DONE. The display should read
2 BATCHES DONE?
6. Press and release YES. The display should now
read %BYPASS.
7. Press and release DONE. The display should now
read 2 BATCHES DONE?
8. Press and release YES. The display will read SET
PULSE BREW.
9. Press and release NO. The display should now read
DRIP TIME and a batch light should be flashing.
10. Using the (-) and (+), set the amount of time from
when the brew solenoid shuts off to when drip-out
occurs for that batch size.
11. When finished, press the other batch size and repeat
step 10.
12. When finished, press DONE. The display should
read 2 BATCHES DONE?
13. If both batch sizes are not correct, press and release
NO to return to the DRIP TIME setup screen and
repeat steps 10 through 12.
14. If both batch sizes are correct, press YES. The
display should show the name of the recipe be-
ing programmed (modified) along with SETUP
COMPLETE. After a 5 second delay, the display will
advance to the next recipe name in the brewer's
memory. If no other coffee names are present, the
display will read THAT WAS THE LAST RECIPE. To
exit to the MAIN SCREEN, press and release either
ON/OFF button.
REVIEW RECIPES?
NO
PRESSING NO WILL
ADVANCE TO NEXT
FUNCTION SCREEN
ADVANCE TO THE
RECIPE TO BE
MODIFIED
SET BOTH
BATCH SIZES
IF NO, RETURN TO
DRIP TIME
Page 32
YES
NO NAME COFFEE
MODIFY SHOW NEXT
(RECIPE NAME)
MODIFY SHOW NEXT
SET BREW OZ XX.X AND % BYPASS
WHEN BOTH BATCHES ARE DONE,
PRESS YES TO ADVANCE TO
SET PULSE BREW
SET PULSE BREW
NO YES
DRIP TIME X:XX
(-) DONE (+)
2 BATCHES DONE?
NO YES
(RECIPE NAME)
SETUP COMPLETE
AFTER A 5 SECOND DELAY, DISPLAY
WILL ADVANCE TO NEXT RECIPE IN
BREWER MEMORY.
IF NO OTHER COFFEE NAMES ARE
PRESENT, THE DISPLAY WILL READ;
THAT WAS THE
LAST RECIPE
38112.1 042105