Displaying And Deleting Measurements - Beurer BC 85 Instructions For Use Manual

ment based on the measurements can be dangerous. Always
follow your GP's instructions.
Risk indicator:
The measurements can be classified and evaluated in accord-
ance with the following table.
However, these standard values serve only as a general
guideline, as the individual blood pressure varies in different
people and different age groups etc.
It is important to consult your doctor regularly for advice. Your
doctor will tell you your individual values for normal blood
pressure as well as the value above which your blood pres-
sure is classified as dangerous.
The classification on the display and the scale on the unit
show which category the recorded blood pressure values fall
into. If the values of systole and diastole fall into two different
categories (e.g. systole in the 'High normal' category and di-
astole in the 'Normal' category), the graphical classification on
the device always shows the higher category; for the example
given this would be 'High normal'.
Blood pressure Systole
value category (in mmHg)
Setting 3:
severe ≥ 180
hypertension
Setting 2:
moderate 160 – 179 100 – 109
hypertension
Diastole
Action
(in mmHg)
seek medical
≥ 110
attention
seek medical
attention
Blood pressure Systole
value category (in mmHg)
Setting 1:
mild 140 – 159 90 – 99
hypertension
High normal 130 – 139 85 – 89
Normal 120 – 129 80 – 84
Optimal < 120
Source: WHO, 1999 (World Health Organization)

7. Displaying and deleting measurements

User memory
The results of every successful measurement are stored to-
gether with the date and time. The oldest measurement is
overwritten in the event of more than 60 measurements.
• Select the desired user memory (
memory buttons if the device is switched off.
– To view the measurement data for user
memory , press the M1 memory but-
ton.
– To view the measurement data for
user memory , press the M2 mem-
ory button.
The average of all measurements ap-
pears on the display.
®
If Bluetooth is activated (the symbol will flash on the dis-
play), the blood pressure monitor is attempting to connect
to the app. If you press the M1 button in the meantime, the
27
Diastole
Action
(in mmHg)
regular monito-
ring by doctor
regular monito-
ring by doctor
self-monitoring
< 80 self-monitoring
) using the M1 or M2