Preparing For The Measurement - Beurer BC 85 Instructions For Use Manual

Information on the display:
1. Risk indicator
2. Time and date
3. Systolic pressure
4. Diastolic pressure
5. Cardiac arrhythmia symbol
Pulse symbol
6. Calculated pulse value
7. User memory /
8. Pump up, release air (arrow)
9. Memory space number/memory display
average value ( A ), morning ( AM ), evening ( PM )
10. Battery status indicator
®
11. Symbol for Bluetooth
1 2
11
10
9
8
7
PUL
/min
6 5
transfer
SYS
mmHg
3
4
DIA
mmHg
System requirements for the „ beurer Health Manager" PC
software.
– from Windows 7 SP1
– from USB 2.0 (Type-A)
System requirements for the "beurer HealthManager" app
TM
– iOS ≥ 9.0, Android
®
– Bluetooth ≥ 4.0
List of compatible devices:

4. Preparing for the measurement

Inserting the batteries
• Remove the battery
compartment lid on the
left side of the device.
• Insert two 1.5 V AAA (al-
kaline type LR03) batter-
ies. Make sure that the batteries are inserted the correct
way round. Do not use rechargeable batteries.
• Close the battery compartment lid again carefully.
If the battery change symbol
no more measurements are possible and you must replace
all batteries.
All display elements are briefly displayed,
display. Now set the date and time as described below.
23
≥ 5.0
is flashing and E6 appears,
flashes in the