Table of Contents
Related Manuals for Jet JDC-510
Summary of Contents for Jet JDC-510
- Page 1 Operating Instructions and Parts Manual Metalworking Dust Collector Model JDC-510 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-414900 Ph.: 800-274-6848 Edition 1 12/2020 www.jettools.com Copyright © 2020 JET...
-
Page 2: Important Safety Instructions
If used for other feed rate. Do not force a tool or attachment purposes, JET disclaims any real or implied to do a job for which it was not designed. warranty and holds itself harmless from any The right tool will do the job better and more injury that may result from that use. - Page 3 26. Do not use this dust collector to pick up WARNING: This product can expose you to flammable or combustible liquids, and do not chemicals including lead which is known to the use it in explosive environments. State of California to cause cancer and birth defects 27.
-
Page 4: Specifications
2.0 Specifications Model number JDC-510 Stock number 414900 Motor and electricals Motor type totally enclosed fan cooled, induction, capacitor start Horsepower 3 HP (2.25 kW) Phase single Voltage 230 V Cycle 60 Hz Listed FLA (full load amps) 15A (230V) -
Page 5: Shipping Contents
JDC-500019 Fireproof Collecting Bag Index 47 JDC-510-47 Clamp Index 50 JDC-510-50 Instructions and Parts List Registration Card 3.1 Hardware package (part no. JDC-510-HP) Figure 3-2 Description Specification Q’ty Index in parts list Part No. Flat Head Machine Screw 1/4”x1/2” Index 19... - Page 6 Read and understand the entire contents this manual before attempting assembly or operation. Failure to comply may cause serious injury. 4.0 Assembly 2-PERSON LIFT. Failure to comply may cause injury. The numbers in parentheses match the callout numbers in the Figures and in the parts breakdown.
-
Page 7: Electrical Connections
No adapter is The JDC-510 Dust Collector is rated at 230 volt, available or should be used with this tool. If the single phase only, and is provided with a 6-20P... -
Page 8: Operation
Serial Number of your machine available when you call will allow us to serve you quickly and accurately. Non-proprietary parts, such as fasteners, can be found at local hardware stores, or may be ordered from JET. Some parts are shown for reference only, and may not be available individually. - Page 9 11.1 414900, JDC-510 – Exploded View...
- Page 10 34 ..... JDC-500017 ..... Pan HD Phillips Machine Screw ......3/16-18x3/8 ....1 35……GH1340A-TBCP-16-04 ... Open End Wrench * ..........10/12 mm ....1 36 ..... JDC-510-36 ....Pan HD Phillips Machine Screw ......3/16-18 x 3/4 ....2 37 ..... TS-1482041 ..... Hex Cap Screw ............ M6x20 ......3 38 .....
- Page 11 12.0 JDC-510 Wiring Diagram...
-
Page 12: Warranty And Service
JET sells through distributors only. The specifications listed in JET printed materials and on official JET website are given as general information and are not binding. JET reserves the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason ®...