Switching Dhw Heating On Or Off; One-Off Dhw Heating Outside The Time Program - Viessmann VITODENS 100-W B1HE Operating Instructions Manual

Vitodens 100-W B1HE/B1KE Operating

Switching DHW Heating On or Off

One-off DHW Heating Outside the Time Program

Tap the following buttons:
1. Call up the home screen.
2.
3. for "Turn on/off"
4. OK to confirm
5. for "DHW"
6. OK twice to confirm
7. for "ON" or "OFF"
8. OK to confirm
9. OK to acknowledge the information
10. for approx. 4 sec, to exit the menu.
Note: To set a time program, see page 13.
Note: Not valid for systems with a DHW tank with
temperature switch (such as an Aquastat).
If you require hot water outside the set time phases,
switch on "One-off heating DHW". The DHW tank is
heated once to the set DHW temperature.
This function has a higher priority than other functions,
such as the time program for example.
Switching on "One-off heating DHW"
Tap the following buttons:
1. Call up the home screen.
2.
3. for "DHW"
4. OK to confirm
5. for "One-off heating"
6. OK to confirm
7. to activate
8. OK to confirm
9. OK to acknowledge the information
Switching off "One-off heating DHW"
"One-off heating DHW" ends as soon as the target
DHW temperature has been reached.
To terminate "One-off heating DHW" early, tap the
following buttons:
1. Call up the home screen.
2.
3. for "DHW"
4. OK to confirm
5. for "One-off heating" (active)
6. OK to confirm
7. for "Stop"
8. OK to confirm
9. OK to acknowledge the information
DHW Heating
17