FLASHFORGE 3D PRINTER Creator X Startup Manual page 10

Should you encounter any problems, please feel free to email me at: 597891915@qq.com
2 slicing defaults for PLA printing.
B. This tells the printer which extruder to use for a dual-extruder head printer, either the left
head or the right head can be selected.
C. If your sample will have any hanging surfaces, it is recommended to have support. None
means no support. Exterior means surface support. Full support means all support.
D. Object infill: where 100% is a solid print, 0% is a hollow object. The recommended setting
is 10%, this will save time and filament. Low infill also can reduce the corners lift up issue
during ABS printing.
E. Layer Height: this controls the vertical resolution of the print. The recommended thickness
is 0.20mm.
Number of shells: this is the wall thickness; it's usually set at 1.
F.
G. Feedrate: is the speed at which the filament is fed into the extruder. This usually set
between 30 and 70. For ABS printing, 60 is recommended, for PLA printing, 100 is
recommended.
Travel feedrate: is the speed at which the printer head moves over the base, it's usually set
H.
between 30 and 100. For ABS printing, 80 is recommended, for PLA printing, 120 is
recommended
I. Print Temperature: is the temperature to which the nozzle is heated. This varies between
filament types. For ABS, set it to 220. For PLA, set it to 200.
Click Generate Gcode and a progress bar will appear.
NOTE: For users who did not choose the default installation path in the installation of Python,
clicking the Generate Gcode button in Replicator G, will result in dialogue box popping up alerting
that the executable Python file cannot be found.
8