Regulatory Information - Elo TouchSystems 1900L User Manual

REGULATORY INFORMATION

I. Electrical Safety Information:
A) Compliance is required with respect to the voltage, frequency, and
current requirements indicated on the manufacturer's label. Connec-
tion to a different power source than those specifi ed herein may result
in improper operation, damage to the equipment, invalidation of
warranty, or a fi re hazard if the requirements are not followed.
B) There are no operator-serviceable parts inside this equipment.
There are hazard ous voltages generated by this equipment which
constitute a safety hazard. Service should be provided only by a
qualifi ed service technician.
C) This equipment is provided with a detachable power cord which
has an integral safety ground wire intended for connection to a
grounded safety outlet.
II. Emissions and Immunity Information
A) Notice to Users in the United States: This equipment has been
tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a
residential or commercial installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed and used
in accordance with the instructions, may cause harmful interference to
radio communications.
1) Do not substitute the cord with other than the provided
approved type. Under no circumstances use an adapter plug to
connect to a 2-wire outlet as this defeats the continuity of the
grounding wire.
2) The equipment requires the use of the ground wire as a part of
the safety certifi cation. Modifi cation or misuse can provide a
shock hazard that can result in serious injury or death.
3) Contact a qualifi ed electrician or the manufacturer if there are
questions about the installation prior to connecting the equipment
to main power.
Elo TouchSystems 1900L User Guide 29