Chapter 3: Operation; About Touchmonitor Adjustments - Elo TouchSystems 1900L User Manual
19-inch lcd touchmonitor
Hide thumbs
Also See for 1900L:
- Specification sheet (2 pages) ,
- Product dimensions (4 pages) ,
- Specification sheet (2 pages)
Table of Contents
Advertisement
C H A P T E R
3
OPERATION
About Touchmonitor Adjustments
Your touchmonitor probably does not require adjustment. However,
variations in video output and application may require adjustments to
your touchmonitor to optimize the quality of the display.
For best performance, your video source should be at 1440 X 900
resolution, at 56–76 Hz refresh rate. Operating in other resolutions
degrades video performance.
For input video outside the refresh rate and dot clock ranges, the
monitor does not automatically adjust, but displays an "Out of Range"
(OOR) message and the On-screen Display (OSD) menu, which ordi-
narily allows you to change monitor settings, is then disabled.
Note: Do not operate the touchmonitor if you see the OOR message,
or LCD damage may result. If you see the OOR message, set the
video mode to one within the allowable range.
Elo TouchSystems 1900L User Guide
15
Advertisement
Table of Contents
