Installing The Touch Driver - Elo TouchSystems 1900L User Manual

Installing the Touch Driver

Your Elo touchmonitor is Plug-and-Play compliant. Information on
the video capabilities of the touchmonitor is sent to the video display
adapter when the computer's operating system starts. If the comput-
er's operating system detects the touchmonitor, follow the instructions
on the screen to install a generic Plug-and-Play monitor.
Elo TouchSystems provides touchscreen driver software that allows
your touchmonitor to work with your computer. Drivers are located on
the enclosed CD.
The latest versions of drivers and driver information for all operating
systems, including those that are not included with the CD, are avail-
able on the Elo TouchSystems website at www.elotouch.com/
support/downloads/.
To install the Touch Driver, follow the steps below:
1
2
3
If there are no on-screen instructions when you install the
TouchTools or APR CD:
1
2
3
4
Insert the TouchTools or APR CD in your computer's CD-ROM
drive.
Click on Install Driver for This Computer.
Follow the on-screen instructions to complete the installation.
Click Start > Run.
Click the Browse button to locate the EloCd.exe program
on the CD-ROM.
Click Open, then OK to run EloCd.exe.
Follow the directions on the screen to complete the driver
installation.
Elo TouchSystems 1900L User Guide 10