QDI Superb 4L Manual page 54

Appendix
figure-5 Recover Interface
1.Recover Partition Table
It used to restore the partition table data stored in
backup area to current Hard Disk.
2.Recover System Partition
It used to restore the system partition data stored
in current backup area to current system
partition. If current system partition doesn't match
the backup system partition, a warning will be
displayed indicating the recovery fails. This
feature will only restore the bootable partition
and contents in other partitions will be
untouched.
3.Recover Whole Disk
It used to restore all the Hard Disk data stored in
current backup area to current Hard DIsk. This
operation will restore the partition table and data
in all partitions, as a result, existing data in
current Hard Disk will be overwritten.
4.Recover CMOS Setup
This will restore the latest backup of the CMOS
Settings you have made to the current CMOS.
5 Exit Recovery Menu
It is used to exit Recovery Interface.
48
1 Recover Partition Table
2 Recover System Partition
3 Recover Whole Disk
4 Recover CMOS Setup
5 Exit Backup Menu
figure-4 Recover process
Manual for S4L series