QDI Superb 4L Manual page 43

Item
l ECP Mode Use 3
DMA 1
l Game Port Disabled
Address 201,209
l Midi Port Address Disabled
290/300
330
l Midi Port IRQ 5
10
l USB Controller Enabled
Disabled
l USB Keyboard Enabled
Support Disabled
l IDE HDD Block Enabled
Mode
Disabled
l Init Display First PCI Slot
AGP
l AGP Auto Enabled
Calibration Disabled
l IDE Access Embedded BUS Access IDE using Embedded BUS.
Interface PCI BUS
l MAC Access Embedded BUS Access MAC using Embedded BUS.
Interface PCI BUS
l USB1 Access Embedded BUS Access USB1 using Embedded BUS.
Interface PCI BUS
Option
Set ECP Mode Use DMA is 1 or 3.
This option is used to configure Game Port
Address.
This option is used to configure Midi Port
Address.
This option is used to configure Midi Port
IRQ.
Enable onchip USB controller.
Disable onchip USB controller.
Support USB Keyboard under legacy OS.
Do not support USB Keyboard under legacy OS.
Allow IDE HDD to read/write several sectors at
once.
IDE HDD only reads/writes a sector once.
Initialize the PCI VGA first.
Initialize the AGP first.
Enable the AGP auto calibration.
Disable the AGP auto calibration.
Access IDE using PCI BUS.
Access MAC using PCI BUS.
Access USB1 using PCI BUS.
Manual for S4L series
BIOS Description
Description
37