QDI Superb 4L Manual page 42

Chapter 3
Item
SIS-7013 S/W Enabled
l
Modem Disabled
l SIS-900 Enabled
10/100M ETHERNET Disable
l System Share 4/8/16 MB
Memory Size 32/64 MB
l Onboard Super IO Press Enter
Device
l Onboard FDC Enabled
Controller Disabled
l Onboard 3F8/IRQ4,
Serial Port 1/2 2F8/IRQ3,
3E8/IRQ4,
2E8/IRQ3,
Auto
Disabled
l UART Mode Normal
Select IrDA
ASK IR
l UR2 Duplex Mode Half
Full
l Onboard Parallel 378/IRQ7
Port 278/IRQ5
3BC/IRQ7
Disabled
l Parallel Port SPP
Mode EPP
ECP
ECP+EPP
36
Option
Enable CNR AC97 Modem.
Disable CNR AC97 Modem.
The onboard LAN is enabled.
The onboard LAN is disabled.
Set the display memory as 6/8/16/32/64MB.
Press enter to set Super IO device.
Onboard floppy disk controller is enabled.
Onboard floppy disk controller is disabled.
Define the onboard serial port address and
required interrupt number.
Onboard serial port address and IRQ are
automatically assigned.
Onboard serial port is disabled.
Defines Serial Port as standard serial port.
Supports IRDA mode.
Supports SHARP ASK-IR protocol with maximum
baud rate up to 57600bps.
Default is recommended.
Define parallel port address and IRQ channel.
Onboard parallel port is disabled.
Define the parallel port mode
Manual for S4L series
Description