Adjustments And Settings - Harbor Freight Tools ZURICH OBD2 Owner's Manual

Additional Functions

ADJUSTMENTS AND SETTINGS

ADJUSTMENTS AND SETTINGS
4. Use the UP
as necessary, to scroll to the desired
DTC type (P=Powertrain, U=Network,
B=Body, C=Chassis), then press the
DTC button.
The selected character displays solid,
and the next character is highlighted.
5. Select the remaining digits in the DTC
in the same way. When you have
selected all the DTC digits, press
ENTER
6. When you have finished viewing the DTC
definition, highlight Back, then press
ENTER
screen and enter additional DTCs; or,
press M to return to the Main Menu.
If a definition for the DTC you entered is not available, an advisory
message shows Highlight Back, then press ENTER
to the Enter DTC screen and enter additional DTCs; or, press M to
return to the Main Menu.
Viewing LED Definitions
The SYSTEM STATUS LEDs on the scan tool provide a visual
indication of the I/M Readiness status of the vehicle under test. The
LED Definitions function provides a description of the meanings of the
green, yellow and red SYSTEM STATUS LEDs.
1. From the Tool Library menu, select LED
Definitions, then press ENTER
The LED Meaning screen displays.
The screen provides a description of
the meanings of the green, yellow
and red SYSTEM STATUS LEDs.
2. When you have finished viewing the
LED meanings, press M to return to the
Main Menu.
ADJUSTMENTS AND SETTINGS
You can access the Adjustments and Settings MENU while the Scan Tool is
in "Live Data" mode. The Scan Tool lets you make several adjustments and
settings to configure the Scan Tool for your particular needs. The following
adjustments and settings are available:
Adjust Brightness: Adjusts the brightness of the display screen.
Audible Tone: Turns the Scan Tool's audible tone "on" and "off."
When turned "on," a tone sounds each time a button is pressed.
30
30
For technical questions, please call 1-888-866-5797
and DOWN
to continue.
to return to the Enter DTC
buttons,
.
to return