Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the back
of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep
this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2021 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
21j
59091
Advertisement
Table of Contents
Related Manuals for Harbor Freight Tools ZURICH OBD2
Summary of Contents for Harbor Freight Tools ZURICH OBD2
- Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.
- Page 2 Table of Contents Safety ..........3 Operating Instructions....6 Specifications ......5 Warranty ........8 Overview........5 WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
- Page 3 Keep a fire extinguisher suitable for If unreadable or missing, contact gasoline/chemical/electrical fires nearby. Harbor Freight Tools for a replacement. Electrical Safety Do not use the Code Reader Do not expose the Code Reader to rain while standing in water.
- Page 4 Personal Safety Wear ANSI-approved safety People with pacemakers should goggles during use. consult their physician(s) before use. Electromagnetic fields in close Do not wear loose clothing or jewelry. proximity to heart pacemaker could Keep your hair, clothing, and cause pacemaker interference gloves away from moving parts.
- Page 5 Specifications Working Voltage 12 V DC provided by vehicle battery Overview OBD II On-Board Diagnostics It is required by the EPA that all 1996 and If the light comes on and stays on, a minor newer vehicles sold in the United States be engine fault condition is occurring and equipped with an OBD II computer system.
- Page 6 Operation Scan QR code for iOS, 16-pin DLC is usually located under Repair Solutions 2 App. dashboard, within 12 inches of center of panel, on driver’s side of most vehicles. Check vehicle’s service manual for exact location. BEHIND ASHTRAY NEAR LEFT CORNER CENTER Scan QR code for Android,...
- Page 7 FCC ID - 2AMWOFC-BT825 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Record Serial Number Here: Note: If product has no serial number, record month and year of purchase instead.
- Page 8 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the ZURICH OBD2 and is the answer not in the manual?
Questions and answers