Harbor Freight Tools ZURICH OBD2 Owner's Manual page 22

Live Data Mode
CUSTOMIZING LIVE DATA (PIDs)
CUSTOMIZING LIVE DATA (PIDs)
If Live Data is not supported by the vehicle under test, an
advisory message displays. Press SYSTEM MENU
to the System Menu.
If custom Live Data was previously configured, the Select PIDs
to Use screen displays.
- To use the existing custom Live Data selections, select Use
existing PIDs, then press ENTER
- To configure new custom Live Data, select Select new PIDs,
then press ENTER
Proceed to step 3.
If custom Live Data was not
previously selected, the Custom
Live Data menu displays. Proceed
to step 3.
3. Press UP
through the available PIDs. When the
PID you wish to display is highlighted,
ENTER
press
shows to confirm your selection). Repeat until only the PIDs you
want to display are selected.
To deselect a PID, highlight the PID, then press ENTER
The checkmark is removed.
4. When you are finished making your selection(s), press LD to
continue.
If no PIDs have been selected, an advisory message displays.
Press ENTER
5. The Scan Tool is now in "Custom Live Data" mode. Only the PIDs
you selected are shown.
To change the current custom Live
Data selections, select Reselect
PIDs, then press ENTER
return to the Custom Live Data
menu. Repeat step 3.
6. To exit the "Custom Live Data" mode,
press LD to return to the Live Data
Menu.
20
20
For technical questions, please call 1-888-866-5797
. The Custom Live Data menu displays.
and DOWN to scroll
(a "checkmark"
to return to the Custom Live Data menu.
. Proceed to step 5.
to
to return
.