Table of Contents
Advertisement
Yellow LED - Indicates one of the following conditions:
A. A PENDING CODE IS PRESENT – If
the yellow LED is illuminated, it may
indicate a Pending code is present.
Check the display for confirmation. A
Pending code is confirmed by the
presence of a numeric code and the
word PENDING.
B. MONITOR NOT RUN STATUS – If
the display shows a zero (indicating
there are no DTC's present in the
vehicle's computer memory), but the
yellow LED is illuminated, it may be
an indication that some of the
Monitors supported by the vehicle
have not yet run and completed their
diagnostic testing. Check the display
for confirmation. All Monitor icons that
are blinking have not yet run and
completed their diagnostic testing; all
Monitor icons that are solid have run
and completed their diagnostic testing.
Red LED - Indicates there is a
problem with one or more of the
vehicle's systems. The red LED is
also used to show that DTC(s) are
present. In this case, the Malfunction
Indicator (Check Engine) lamp on the
vehicle's instrument panel will light
steady on.
DTC's that start with "P0", "P2"
and some "P3" are considered Generic (Universal). All
Generic DTC definitions are the same on all OBD2 equipped
vehicles. The Scan Tool automatically displays the code
definitions (if available) for Generic DTC's.
DTC's that start with "P1" and some "P3" are Manufacturer
specific codes and their code definitions vary with each vehicle
manufacturer.
13. If more than one DTC was retrieved, and to view Freeze Frame
Data, press and release DTC/FF, as necessary.
Each time DTC/FF is pressed and released, the Scan Tool will
scroll and display the next DTC in sequence until all DTCs in its
memory have displayed.
Freeze Frame data (if available) will display after DTC #1.
For technical questions, please call 1-888-866-5797
Using the Scan Tool
CODE RETRIEVAL PROCEDURE
CODE RETRIEVAL PROCEDURE
9
9
Hide quick links:
Advertisement
Table of Contents
