System Test Menu - Harbor Freight Tools ZURICH OBD2 Owner's Manual

computer, an advisory message displays. Press M to return to
the Main Menu.
If O2 sensor tests are not supported by the vehicle under test,
an advisory message displays. Press M to return to the Main
In addition to retrieving Diagnostic Trouble Codes (DTCs), you can use
Menu.
the scan tool to perform additional diagnostic tests, to view diagnostic
and vehicle information stored in your vehicle's on-board computer, and
3. Select the O2 sensor for which you
to configure the scan tool for your particular needs. Additional tests and
wish to view test results, then press
related functions are accessed through the Main Menu. The following
ENTER
functions are available:
4. When test results have been retrieved,
System Tests – Displays the System
data for the selected sensor test will
Test menu, which lets your retrieve and
show on the diagnostic tool's display.
view results for the O2 Sensor Test and
OBD Monitor Test, and lets you initiate
5. When you have finished viewing the
a test of the vehicle's EVAP system.
retrieved test data:
Vehicle Information – Displays the
To view test results for the next sensor, select Next, then press
Vehicle Info menu, which lets you
ENTER
retrieve and view reference information
for the vehicle under test.
To return to the Select Sensor screen, select Back , then press
Battery/Alternator Monitor – Performs a check of the vehicle's ENTER
battery and alternator system to ensure the system is operating
6. When you have finished viewing test data for all desired sensors,
within acceptable limits.
select Back , then press ENTER
Firmware Version – Displays the diagnostic tool's firmware version.
menu; or, press M to return to the Main Menu.
Tool Library – Displays the Tool Library menu, which provides
access to OBD1 and OBD2 DTC libraries and to definitions for
Monitor icons and LED indications.
Tool Settings – Displays the Tool Settings menu, which lets you
make several adjustments and settings to configure the diagnostic
tool to your particular needs.
22
The Vehicle Information option is shown only when the scan
tool is in Global OBD2 mode.

SYSTEM TEST MENU

Additional tests are accessed through the System Tests menu. The
following functions are available:
O2 Sensor Test - Retrieves and displays O2 sensor monitor test
results from your vehicle's on-board computer.
OBD Monitor Test - Retrieves and displays test results for
emission-related powertrain components and systems that are not
continuously monitored.
EVAP Test - Performs a leak test for the vehicle's EVAP system.
1. While linked to the vehicle, press M.
The Main Menu displays.
2. Select System Tests, then press
ENTER
The System Test menu displays.
If System Tests is not shown
on the Main Menu, the System
Tests
available for your vehicle.
For technical questions, please call 1-888-866-5797
to display the test results.
.
.
.
functions
Additional Functions
SYSTEM TEST MENU
to return to the System Test
are not
21
21