Table of Contents
Advertisement
User's Manual
This item is used to set the EFI storage Option ROM boot or the traditional storage Option ROM boot.
Video
This item is used to set EFI display Option ROM startup or traditional display Option ROM startup.
Other PCI devices
This item is used to set the EFI PCI device Option ROM boot or the traditional PCI device Option ROM
boot.
▶
USB Configuration
USB configuration, enter this sub-menu, there will be USB-related detailed settings.
Legacy USB Support
This item is used to set the USB interface support. If you need to support USB devices under DOS, such as
U disk, USB keyboard, etc., set this item to [Enabled]. Otherwise, select [Disabled].
USB Mass Storage Driver Support
USB mass storage device support switch.
USB Transfer time-out
This item Sets the timeout period for control, batch, and interrupt transmission. The default is 20 seconds.
Device reset time-out
This item sets boot command timeout of the large capacity USB disk. The default is 20 seconds.
Device power-up delay
This item sets boot command delay of the large capacity USB disk. The default is Auto.
40
Advertisement
Table of Contents
