Led; Installation; Hdd/Ssd Installation - JHCTech BRAV-7302 User Manual

2.4.12 LED

There are 1*Power LED, 1*HDD LED, 3*CPU temperature class LEDS on the front. Users can monitor
the working state of the CPU according to the display of LEDs.
Table 2.12 for LEDs state of CPU temperature class.

2.5 Installation

Note: Installation steps take BRAV-7302-S002 as an example, and other models are similar.

2.5.1 HDD/SSD Installation

Step 1: Unscrew 2 screws on the HDD cover, remove the HDD cover;
Step 2: Unscrew 1 screws on the HDD/SSD bracket, take out the HDD/SSD bracket;
Step 3: Put the HDD/SSD in the drive bracket and screw 4 screws as picture shown;
Step 4: Put the drive bracket into the driver bay;
Step 5: Screw 1 screw on the HDD bracket;
Step 6: Install the HDD cover, screw 2 screws;
Table 2.12: LEDs state of CPU temperature class.
LED State
Red Warning
Yellow High
Green Normal
20
User's Manual