Residual Heat Indicator; Temperature Detection - Samsung NZ64H57 Series User Manual

Other reasons why a cooking zone will switch itself off
All cooking zones will switch themselves off if liquid boils over and
lands on the control panel.
The automatic shutoff will also be activated if you place a
damp cloth on the control panel. In both of these instances,
the appliance will need to be switched on again using the main
On/Off control
removed.

RESIDUAL HEAT INDICATOR

When an individual cooking zone or the hob is turned off, the
presence of residual heat is shown with an ,
digital display of the appropriate cooking zones. Even after the
cooking zone has been switched off, the residual heat indicator
goes out only after the cooking zone has cooled.
You can use the residual heat for thawing or keeping food warm.
As long as the residual heat indicator is illuminated, there is a
WARNING
risk of burns.
If the power supply is interrupted, the ,
WARNING
and information about residual heat will no longer be available.
However, it may still be possible to burn yourself. This can be
avoided by always taking care when near the hob.

TEMPERATURE DETECTION

If for any reason the temperatures on any of the cooking zones
were to exceed the safety levels, should this happen then the
cooking zone will automatically reduce to a lower power level.
When you have finished using the hob, the cooling fan will
continue to run until the hob's electronics has cooled down. And
the cooling fan switched itself off depending upon the temperature
of the electronics.
NZ64H57479K_EE_DG68-00560A-00_EN.indd 20
sensor after the liquid or the cloth has been
English - 20 English - 20
(for "hot") in the
symbol will go out
2014-04-15 2:05:22