Samsung NZ64H57 Series User Manual page 187

3. Use the Timer setting selectors (
or ) to set the desired amount of time,
for example, 15 minutes, after which the
cooking zone will automatically switch
itself off. The safety shutoff is now
activated.
4. To cancel the timer settings, select the
target burner and hold down the Timer
control
will cancel the burner's timer settings
with a beep.
If holding down the Timer control
sensor for 3 seconds without selecting a burner, this will cancel
the timer settings of the last changed burner.
To display the time remaining for any of the cooking zones, use
the Timer control
The corresponding control indicator will begin to blink slowly.
The settings are reset using the Timer setting selectors (
). After the set period of time has elapsed, the cooking zone
automatically switches itself off, an acoustic signal sounds as
confirmation and the timer display indicates.
If you tap the Timer control
cooking zone, the display turns on but no timer settings is
applied.
To change the settings quicker, touch and hold any of the
or control sensors until the desired value is reached.
NZ64H57479K_EE_DG68-00560A-00_EN.indd 27
sensor for 3 seconds. This
sensor.
English - 27 English - 27
sensor without selecting a
or
2014-04-15 2:05:25