Residual Heat Indicator; Temperature Detection - Samsung NZ64H5747DK User Manual

Other reasons why a cooking zone will switch
itself off
All cooking zones will switch themselves off if liquid boils
over and lands on the control panel.
The automatic shutoff will also be activated if you place
a damp cloth on the control panel. In both of these
instances, the appliance will need to be switched on again
using the main On/Off control
the cloth has been removed.

RESIDUAL HEAT INDICATOR

When an individual cooking zone or the hob is turned off,
the presence of residual heat is shown with an
"hot") in the digital display of the appropriate cooking
zones. Even after the cooking zone has been switched
off, the residual heat indicator goes out only after the
cooking zone has cooled.
You can use the residual heat for thawing or keeping food
warm.
As long as the residual heat indicator is illuminated,
WARNING
there is a risk of burns.
If the power supply is interrupted, the
WARNING
will go out and information about residual heat
will no longer be available. However, it may still be
possible to burn yourself. This can be avoided by
always taking care when near the hob.

TEMPERATURE DETECTION

If for any reason the temperatures on any of the cooking
zones were to exceed the safety levels, should this
happen then the cooking zone will automatically reduce
to a lower power level.
When you have finished using the hob, the cooling fan
will continue to run until the hob's electronics has cooled
down. And the cooling fan switched itself off depending
upon the temperature of the electronics.
NZ64H5747DK_ET_DG68-00660B-02_EN.indd 21
sensor after the liquid or
English - 21
, (for
, symbol
2017-05-25 12:20:41