Quickly Join A Zigbee Network - Ebyte E180-DTU User Manual

Chengdu Ebyte Electronic Technology Co., Ltd

7.2 Quickly join a ZigBee network

(1) Open the setting software "E180-DTU-Setting", select the port number, set the baud rate of the serial port, and
open the serial port.
(2) After the serial port is opened, first click "Enter configuration mode", and the message box prompts "Enter
configuration state successfully, read parameters successfully." The main network parameters include: the default node
type is terminal, the default channel is 11, the PAN ID default is random, and the tx power The default is 20.
(3) Modify the node type to sleep terminal, click the button next to it, and the message box prompts "Configure
device type successfully". Modify the network parameters, the PAN ID and transmission channel parameters must be the
same as the network to be added. The message box prompts "Successfully written parameters".
Copyright ©2012–2019,
C
hengdu Ebyte Electronic Technology Co.,Ltd
E180-DTU(ZG120-485) Usermanual
24