Ebyte E180-DTU User Manual page 30

Chengdu Ebyte Electronic Technology Co., Ltd
(2) For example, if the coordinator is the sender, click "Enter configuration mode" to enter the fixed network and
select the multicast mode. The message box prompts "In multicast mode, the nodes in the network with the same group
number will receive multicast data", modify the target group number to "5", and then write the parameter, and the
message box prompts "Successfully written parameter".
(3) Enter the transmission mode, the message box prompts "Successfully entered the transmission mode", and then
perform multicast data communication.
Copyright ©2012–2019,
C
hengdu Ebyte Electronic Technology Co.,Ltd
E180-DTU(ZG120-485) Usermanual
29