Chengdu Ebyte Electronic Technology Co., Ltd
after receiving the wireless data.
5.2.2 Data+short address
When the output mode of the device is data + short address, after the module receives the wireless data, the serial port
will output the original data + short address of the sending device.
5.2.3 Data+long address
When the output mode of the device is data + long address, after the module receives the wireless data, the serial port
will output the original data + long address of the sending device.
5.2.4 Data+RSSI
When the output mode of the device is data + RSSI, after the module receives the wireless data, the serial port will
output the original data + RSSI value of the received packet.
5.2.5 Data+short address+RSSI
When the output mode of the device is data + short address + RSSI, after the module receives the wireless data, the
serial port will output the original data + short address of the sending device + RSSI value of the received packet.
5.2.6 Data+long address+RSSI
When the output mode of the device is data + long address + RSSI, after the module receives the wireless data, the
serial port will output the original data + long address of the sending device + RSSI value of the received packet.
Note: The sender's single packet supports a maximum data packet length of 72 bytes.
6 Application function and command configuration
6.1 Function
6.1.1 LINK description
LINK pin indicates the current network status of the module. After the device is successfully connected to the
Copyright ©2012–2019,
C
hengdu Ebyte Electronic Technology Co.,Ltd
E180-DTU(ZG120-485) Usermanual
9