Chengdu Ebyte Electronic Technology Co., Ltd
(2) After the serial port is opened, first click "Enter configuration mode", and the message box prompts "Enter
configuration state successfully, read parameters successfully." The main network parameters include: the default node
type is terminal, the default channel is 11, the PAN ID default is random, and the default tx power is 10.
(3) Change the node type to coordinator, and click the button next to it, then a message box prompts "Successfully
configured device type". The usual ZigBee 3.0 network is established by the coordinator node, so you need to change the
default terminal node type to the coordinator before establishing the network.
Copyright ©2012–2019,
C
hengdu Ebyte Electronic Technology Co.,Ltd
E180-DTU(ZG120-485) Usermanual
21