Technical Specifications - ResMed AirFit N30i User Manual

• The mask should not be used unless the device is turned on. Once the mask is fitted,
ensure the device is blowing air to reduce risk of rebreathing exhaled air.
• As with all masks, some rebreathing may occur at low pressures.
• Always follow cleaning instructions and only use a mild liquid detergent. Some
cleaning products may damage the mask, its parts and their function, or leave harmful
residual vapours. Do not use a dish washer or washing machine to clean the mask.
• Do not iron the headgear as the material is heat sensitive and will be damaged.
Note: For any serious incidents that occur in relation to this product, these should be
reported to ResMed and the competent authority in your country.

Technical specifications

Compatible devices
For a full list of compatible devices for this mask, see the Mask/Device Compatibility List
at ResMed.com/downloads/masks. SmartStop may not operate effectively when using this
mask with some CPAP or bi-level devices.
Pressure-flow curve:
Mask setting options:
For AirSense, AirCurve or S9
Therapy Pressure:
Resistance: Drop in pressure measured (nominal)
at 50 L/min
at 100 L/min
Sound: Declared dual-number noise emission values in accordance with ISO4871:1996
and ISO3744:2010. A-weighted sound power level and A-weighted sound pressure level at
a distance of 1 m, with uncertainty of 3 dBA, are shown
Sound power level
Sound pressure level
Environmental conditions:
Operating temperature: 5°C to 40°C
Operating humidity: 15% to 95% non-condensing
6
AirFit N30i
Pillows
4 to 25 cm H O
2
0.5 cm H O
2
1.7 cm H O
2
21 dBA
14 dBA
Pressure Flow
(L/min)
(cm H O)
2
4 20
9 31
15 41
20 49
25 55
AirFit P30i
Pillows
4 to 25 cm H O
2
0.4 cm H O
2
1.5 cm H O
2
21 dBA
14 dBA