Frame Sleeve Intended use The AirFit N30i mask is intended to be used by patients weighing more than 30 kg who have been prescribed non-invasive positive airway pressure (PAP) therapy such as CPAP or bi-level therapy. The mask is intended for single patient re-use in the home and multi-patient re-use in the hospital/institutional environment.
Fitting your mask 1. Pull the frame and headgear over your head until the elbow is positioned on top and the headgear is behind your head. 2. Place the cushion under your nose. 3. Tighten or loosen the headgear until the cushion fits comfortably under your nose.
Disassembling your mask for cleaning If your mask is connected to a device, disconnect the device air tubing from the mask elbow. 1. Pull the cushion from the frame. 2. Undo the fastening tabs on the headgear strap and pull it from the frame.
Page 5
• Discontinue using the mask if you have ANY adverse reaction and consult your physician or sleep therapist. • The AirFit N30i nasal CPAP mask is not intended to be used simultaneously with nebuliser medications that are in the air path of the mask/tube.
Storage and transport humidity: up to 95% non-condensing Service life The service life of the AirFit N30i mask system is dependent on the intensity of usage, maintenance, and environmental conditions to which the mask is used or stored. As this...
Reprocessing the mask between patients Reprocess this mask when using between patients. Cleaning, disinfection and sterilization instructions are available on ResMed.com/downloads/masks. If you do not have internet access, please contact your ResMed representative. Symbols The following symbols may appear on your product or packaging:...