Olt Upgrade - TP-Link P1201-08 User Manual

OLT(interface-vlanif-100)# ip address 192.168.2.100 255.255.255.0
OLT(interface-vlanif-100)# exit

3. OLT Upgrade

1. Set up OLT update topology:
Use a PC as FTP server (run wftpd32.exe or Wftpd.exe in this pc), and connect to OLT mgmt port
or ge port to transmit firmware.
2. Test network connectivity
a) Connect PC to OLT console port, used for updating OLT in boot mode.
b) Connect pc to OLT MGMT port or ge port, configure PC ip and OLT ip(inband ip or outband
ip) are in same segment.
c) PC can ping OLT manegemnet IP, if pc can ping OLT manegemnet ip, means OLT can
connect to FTP server.
d) Close PC firewall, prevent firewall intercept FTP software.
3. FTP server configuration
a. Open FTP software, configure FTP username and password, such as: admin/admin
b. Set up a directory of OLT update files for the FTP server, such as the way for setting up the
wftp32. Exe software：
---Security -> User/Rights Security Dialog -> User Name —input admin
---Change Password —input admin
---Home Directory
—set directory of OLT upgrade files
4