Configure Olt Service; Configure Olt Globle Vlan; Configure Olt Ge Port Service Vlan - TP-Link P1201-08 User Manual

5.3 Configure OLT Service

5.3.1 Configure OLT Globle Vlan

In config mode,we can use OLT(config)# show vlan all to show the created vlan.
If the created vlan can't meet the need, we can use command OLT(config)# vlan vlan-list to create
new vlan,According to the data plan, we create vlan100,vlan200,vlan300 firstly:
OLT(config)# vlan 100
OLT(config)# vlan 200
OLT(config)# vlan 300

5.3.2 Configure OLT GE Port Service Vlan

We can config GE port vlan mode as access, hybrid and trunk, according to our network plan
configure different mode, configure way of three mode as follows.
Configure GE 1、 2、 3 port vlan mode is access(in this document, GE port connect to PC, so we
configure ge port vlan mode as access):
OLT(config)# interface ge 0/0
OLT(config-interface-ge-0/0)# vlan mode 1-3 access
OLT(config-interface-ge-0/0)# vlan access 1 100
OLT(config-interface-ge-0/0)# vlan access 2 200
OLT(config-interface-ge-0/0)# vlan access 3 300
OLT(config-interface-ge-0/0)# exit
Configure GE 1、2、3 port vlan mode is trunk：
OLT(config)# interface ge 0/0
23