Configure Gateway Ont（Hgu）Multicast Service--Rtk Solution - TP-Link P1201-08 User Manual

4.7.2 Configure Gateway ONT（HGU）Multicast Service--RTK Solution
premise condition

OLT connect to uplink device and open multicast service

OLT have created vlan for multicast

OLT have configured GE port multicast vlan

ONT have registered
1. Create service port
OLT(config)# service-port 5 vlan 200 gpon 0/0 port 1 ont 2 gemport 3 multi-service user-vlan
200 tag-action transparent
2. Create bridge wan and bind LAN2 in ont web
Click InternetInternet Config WAN Config
NOTE：
Mode select to Bridge. Check Enable Vlan, Vlan ID input 200. Service Mode select Other. Bind
port click Port_2.
3. Config IGMP mode in ONT web
Click Application IGMP Config IGMP Snooping. Enable IGMP Snooping.
4. Configure multicast vlan on ONT web
14