Installing The Hpe Ns204I-P Nvme Os Boot Device Option - Hewlett Packard Enterprise HPE Apollo 4200 Gen10 User Manual

13. Install the system into the rack (Installing the system into the rack).
14. Power up the system (Power up the system).

Installing the HPE NS204i-p NVMe OS Boot Device option

Prerequisites
Before beginning installation, ensure that the server is updated with the latest operating system firmware and drivers.
Procedure
Installing drives onto the boot device
1.
Remove the liner from the thermal interface pad.
2. Install the drives.
Installing the boot device
3. Power down the system (Power down the system).
4.
Remove all power:
Hardware options installation
88