Automation: Z-Wave And Other Devices; Working With Z-Wave Devices - Honeywell Lyric LCP300-L User Reference Manual

Automation: Z-Wave and Other Devices

Automation can ONLY be used for lifestyle enhancement. It must not be used for
personal safety or property protection.

Working with Z-Wave Devices

Z-Wave automation functionality is supplementary only and has not been
NOTE
evaluated by compliance agency.
Z-Wave technology is designed to automate devices in a home control network. The Lyric
Gateway is a security enabled Z-Wave device that supports Z-Wave Network Wide Inclusion
(NWI) Mode.
The Gateway and Z-Wave devices added to your system are linked together in a wireless
network. Each device in the network is assigned a unique address and cannot be activated by a
neighbor's Z-Wave controller. The Z-Wave network supports multiple controllers, allowing Z-
Wave remote controls to be used throughout the home.
NOTE: In some cases, a Z-Wave device might not report its status to the Lyric Gateway when
an action is initiated at the device itself. This varies with the manufacturer.
Press Automation on the Home screen. The Automation Management screen appears, initially
displaying categories of Z-Wave devices. (Your
these illustrations.)
This screen may also display "Press to see Failed Devices". See
for more information.
Press the Down arrow for more options:
Consult your installer about the options available in your system.
Home > Automation
IMPORTANT
MyHome Gateway
23
App's display may differ from
Failed Devices (Failed Nodes)